DSpace Repository

The Cyber-Physical System for Increasing the Efficiency of the Iron Ore Desliming Process

Show simple item record

dc.contributor.author Morkun, Volodymyr
dc.contributor.author Morkun, Natalia
dc.contributor.author Pikilnyak, Andrii
dc.contributor.author Семеріков, Сергій Олексійович
dc.contributor.author Serdiuk, Oleksandra
dc.contributor.author Gaponenko, Irina
dc.date.accessioned 2021-06-21T19:08:54Z
dc.date.available 2021-06-21T19:08:54Z
dc.date.issued 2021-04-23
dc.identifier.citation Morkun V. The Cyber-Physical System for Increasing the Efficiency of the Iron Ore Desliming Process [Electronic resource] / Volodymyr Morkun, Natalia Morkun, Andrii Pikilnyak, Serhii Semerikov, Oleksandra Serdiuk, Irina Gaponenko // Proceedings of the 2nd International Workshop on Intelligent Information Technologies & Systems of Information Security (IntelITSIS 2021). Khmelnytskyi, Ukraine, March 24–26, 2021 / Edited by : Tetiana Hovorushchenko, Oleg Savenko, Peter Popov, Sergii Lysenko // CEUR Workshop Proceedings. – 2021. – Vol. 2853. – P. 450-459. – Access mode : http://ceur-ws.org/Vol-2853/paper49.pdf uk
dc.identifier.issn 1613-0073
dc.identifier.uri http://ceur-ws.org/Vol-2853/paper49.pdf
dc.identifier.uri http://elibrary.kdpu.edu.ua/xmlui/handle/123456789/4373
dc.identifier.uri https://doi.org/10.31812/123456789/4373
dc.description [1] R. Arjmand, M. Massinaei, A. Behnamfard, Improving flocculation and dewatering performance of iron tailings thickeners, Journal Of Water Process Engineering. 31 (2019) 100873. doi:10.1016/j.jwpe.2019.100873. [2] M. Garmsiri, M. Unesi, Challenges and opportunities of hydrocyclone-thickener dewatering circuit: A pilot scale study, Minerals Engineering. 122 (2018) 206-210. doi:10.1016/j.mineng.2018.04.001. [3] S. Tripathy, Y. Murthy, S. Farrokhpay, L. Filippov, Design and analysis of dewatering circuits for a chromite processing plant tailing slurry, Mineral Processing And Extractive Metallurgy Review. 42 (2019) 102-114. doi:10.1080/08827508.2019.1700983. [4] P. Fawell, T. Nguyen, C. Solnordal, D. Stephens, Enhancing Gravity Thickener Feedwell Design and Operation for Optimal Flocculation through the Application of Computational Fluid Dynamics, Mineral Processing And Extractive Metallurgy Review. (2019) 1-15. doi:10.1080/08827508.2019.1678156. [5] X. Chen, X. Jin, H. Jiao, Y. Yang, J. Liu, Pore Connectivity and Dewatering Mechanism of Tailings Bed in Raking Deep-Cone Thickener Process, Minerals. 10 (2020) 375. doi:10.3390/min10040375. [6] G. Liang, Q. Zhao, B. Liu, Z. Du, X. Xia, Treatment and reuse of process water with high suspended solids in low-grade iron ore dressing, Journal Of Cleaner Production. 278 (2021) 123493. doi:10.1016/j.jclepro.2020.123493. [7] C. Wang, J. Ding, R. Cheng, C. Liu, T. Chai, Data-Driven Surrogate-Assisted Multi-Objective Optimization of Complex Beneficiation Operational Process, IFAC-Papersonline. 50 (2017) 14982-14987. doi:10.1016/j.ifacol.2017.08.2561. [8] R. Dwari, S. Angadi, S. Tripathy, Studies on flocculation characteristics of chromite’s ore process tailing: Effect of flocculants ionicity and molecular mass, Colloids And Surfaces A: Physicochemical And Engineering Aspects. 537 (2018) 467-477. doi:10.1016/j.colsurfa.2017.10.069. [9] A. Leite, É. Reis, Cationic starches as flocculants of iron ore tailing slime, Minerals Engineering. 148 (2020) 106195. doi:10.1016/j.mineng.2020.106195. [10] L. Zhu, W. Lyu, P. Yang, Z. Wang, Effect of ultrasound on the flocculation-sedimentation and thickening of unclassified tailings, Ultrasonics Sonochemistry. 66 (2020) 104984. doi:10.1016/j.ultsonch.2020.104984. [11] Y. Zhao, L. Meng, X. Shen, Study on ultrasonic-electrochemical treatment for difficult-to-settle slime water, Ultrasonics Sonochemistry. 64 (2020) 104978. doi:10.1016/j.ultsonch.2020.104978.3. [12] R. Jia, B. Zhang, D. He, Z. Mao, F. Chu, Data-driven-based self-healing control of abnormal feeding conditions in thickening–dewatering process, Minerals Engineering. 146 (2020) 106141. doi:10.1016/j.mineng.2019.106141. [13] Y. Mikhlin, S. Vorobyev, A. Romanchenko, S. Karasev, A. Karacharov, S. Zharkov, Ultrafine particles derived from mineral processing: A case study of the Pb–Zn sulfide ore with emphasis on lead-bearing colloids, Chemosphere. 147 (2016) 60-66. doi:10.1016/j.chemosphere.2015.12.096. [14] T. Leistner, U. Peuker, M. Rudolph, How gangue particle size can affect the recovery of ultrafine and fine particles during froth flotation, Minerals Engineering. 109 (2017) 1-9. doi:10.1016/j.mineng.2017.02.005. [15] J. Carpenter, S. Iveson, K. Galvin, Ultrafine desliming using a REFLUX™ classifier subjected to centrifugal G forces, Minerals Engineering. 134 (2019) 372-380. doi:10.1016/j.mineng.2019.02.013. [16] E. Matiolo, H. Couto, N. Lima, K. Silva, A. de Freitas, Improving recovery of iron using column flotation of iron ore slimes, Minerals Engineering. 158 (2020) 106608. doi:10.1016/j.mineng.2020.106608. [17] V. Morkun, S. Semerikov, S.Hryshchenko, K.Slovak, Environmental geo-information technologies as a tool of pre-service mining engineer's training for sustainable development of mining industry, CEUR Workshop Proceedings. 1844 (2017) 303-310. [18] V. Morkun, N. Morkun, V.Tron, Distributed control of ore beneficiation interrelated processes under parametric uncertainty. Metallurgical and Mining Industry. 7(8) (2015) 18-21. [19] S. Rath, N. Dhawan, D. Rao, B. Das, B. Mishra, Beneficiation studies of a difficult to treat iron ore using conventional and microwave roasting, Powder Technology. 301 (2016) 1016-1024. doi:10.1016/j.powtec.2016.07.044. [20] V. Morkun, N. Morkun, Estimation of the crushed ore particles density in the pulp flow based on the dynamic effects of high-energy ultrasound, Archives of Acoustics. 43(1) (2018) 61-67. [21] V. Morkun, N. Morkun, A. Pikilnyak, The adaptive control for intensity of ultrasonic influence on iron ore pulp, Metallurgical and Mining Industry. 6(6) (2014) 8-11. [22] S. Mahiuddin, S. Bondyopadhway, J. Baruah, A study on the beneficiation of indian iron-ore fines and slime using chemical additives, International Journal Of Mineral Processing. 26 (1989) 285-296. doi:10.1016/0301-7516(89)90034-3. [23] High intensity focused ultrasound simulator, Mathworks.com. (2021). https://www.mathworks.com/matlabcentral/fileexchange/30886-high-intensity-focusedultrasound-simulator?s_tid=srchtitle (accessed 5 February 2020). [24] V. Morkun, N. Morkun, V. Tron, Model synthesis of nonlinear nonstationary dynamical systems in concentrating production using Volterra kernel transformation, Metallurgical and Mining Industry. 7(10) (2015) 6-9. [25] M. Mamina, R. Maganga, K. Dzwiti, An analysis of Zimbabwe's comparative advantage in the beneficiation and value addition of minerals, Resources Policy. 69 (2020) 101823. doi:10.1016/j.resourpol.2020.101823. [26] Y. Chen, V. Truong, X. Bu, G. Xie, A review of effects and applications of ultrasound in mineral flotation, Ultrasonics Sonochemistry. 60 (2020) 104739. doi:10.1016/j.ultsonch.2019.104739. [27] V. Golik, V. Komashchenko, V. Morkun, V. Zaalishvili, Enhancement of lost ore production efficiency by usage of canopies, Metallurgical and Mining Industry 7(4) (2015) 325-329. [28] O. P. Kreuzer, M. Yousefi, V. Nykänen, Introduction to the special issue on spatial modelling and analysis of ore-forming processes in mineral exploration targeting, Ore Geology Reviews. 119 (2020) 103391. doi:10.1016/j.oregeorev.2020.103391. [29] New ZET 230 ADC module, technical characteristics, news, ZETLAB. (2021). https://zetlab.com/en/new-zet-230-adc-module/ (accessed 15 February 2021). [30] C. Besta, A. Kastala, P. Ginuga, R. Vadeghar, MATLAB Interfacing: Real-time Implementation of a Fuzzy Logic Controller, IFAC Proceedings Volumes. 46 (2013) 349-354. doi:10.3182/20131218-3-in-2045.00189.
dc.description.abstract It is proposed to carry out the spatial effect of high-energy ultrasound dynamic effects with controlled characteristics on the solid phase particles of the ore pulp in the deslimer input product to increase the efficiency of thickening and desliming processes of iron ore beneficiation products. The above allows predicting the characteristics of particle gravitational sedimentation based on an assessment of the spatial dynamics of pulp solid- phase particles under the controlled action of high-energy ultrasound and fuzzy logical inference. The object of study is the assessment of the characteristics and the process of control the operations of thickening and deslaming of iron ore beneficiation products in the conditions of the technological line of the ore beneficiation plant. The subject of study is a cyber-physical system based on the use of high-energy ultrasound radiation pressure effects on iron-containing beneficiation products in the technological processes of thickening and desliming. The working hypothesis of the project is that there is a relationship between the physical-mechanical and chemical-mineralogical characteristics of the iron ore pulp solid- phase particles and their behavior in technological flows under the influence of controlled ultrasonic radiation, based on which the imitation modeling of the gravitational sedimentation process of the iron ore pulp solid-phase particles can be performed directly in the technological process. Also, the optimal control actions concerning the processes of thickening and desliming can be determined. uk
dc.language.iso en uk
dc.publisher CEUR Workshop Proceedings uk
dc.subject cyber-physical system uk
dc.subject simulation uk
dc.subject ultrasound uk
dc.subject gamma radiation uk
dc.subject fuzzy inference uk
dc.subject deslimer uk
dc.title The Cyber-Physical System for Increasing the Efficiency of the Iron Ore Desliming Process uk
dc.type Article uk


Files in this item

This item appears in the following Collection(s)

Show simple item record

Search DSpace


Advanced Search

Browse

My Account

Statistics